Weld-On Extension Kits

We offer weld-on exhaust extension kits for various models of generators, as well as Universal size kits. If your generator has a welded-on exhaust flange, and your unit is not listed in the model specific designs below, you will need to measure the diameter and length of your generator exhaust flange. Once you have your exhaust flange measurements you can select from the appropriate size Universal kit for your model.

Please scroll down through this entire page and review the tubing options, as well as the quick disconnect, magnetic dipstick, oil change tube, and through-wall kit options before selecting the type of exhaust extension hose you would like to purchase.

When you order your extension kit, you will have the option to order a discounted quick disconnect, magnetic dipstick, oil change tube, and/or through-wall kit with your extension hose. Magnetic dipsticks and oil change tubes are only available on specific models, and are listed as an option on those models.

Weld On Extension Hose

Measuring Your Generator Exhaust Flange

Exhaust Outlet Diameter Measurement
Exhaust Outlet Length Measurement

Genexhaust.com and 1100 North Innovations, LLC are not affiliated in any way with any generator manufacturer. Any company or product trademarks, service marks, trade names, and/or product names or pictures appearing on this site are the property of their respective owners. The products listed for sale on this site are not associated with any other company. The use of exhaust extension systems are considered after market modifications, and may void the warranty of your generator.

Exhaust extensions kits are available in complete hose kits and hardware only kits.

Weld-On Extension – Complete Hose Kit

Weld On Extension Hose

The weld-on extension hose kits are available in both silicone and steel hosing, and in various diameters depending upon the model you select. The price of each kit will vary depending on the options you select, and the prices will be displayed as you select each option. When selecting a diameter of hose, as a general rule of thumb, use the following guidelines.

  • 3/4″ Diameter – Smaller hose can be used for up to 5 or 6 feet in length at most.
  • 1″ Diameter – Can be used for up to 10 feet in length.
  • 1.5″ Diameter – Can be used for distances over 10 feet.

Quick Disconnects are only available for 1.5″ Diameter hoses. Through-wall kits are available for 1” and 1.5” diameter hoses. All available extra options will be shown for whichever model you select as you customize your package. Select your model or universal size from the list below, and click on that link to be taken to the order page for that model.

Weld-On Extension – Hardware Only Kit

Weld On Hardware Only Kits

Occasionally we get requests for hardware only orders. This is for people who already have their own hose and may want to use it on a different generator, or for people who may want to use standard 3/4″ NPT or 1″ NPT threaded pipe as a hose, which in that case would require 3/4″ NPT or 1″ NPT hardware. The price of each kit will vary depending on the options you select, and the prices will be displayed as you select each option.The available sizes for hardware only are:

  • 1″ Diameter – to be used with hose up to 10 feet.
  • 1.5″ Diameter – to be used with hose up to and over 10 feet.
  • 3/4″ NPT – for 3/4″ NPT steel threaded pipe up to 10 feet.
  • 1″ NPT – for 1″ NPT steel threaded pipe up to 10 feet.
  • 4″ Hardware – to be used with 4″ dryer exhaust hose (hose not available from this site).

1.5″ Diameter, 3/4″ NPT, 1″ NPT, and 4″ hardware each have optional quick disconnects available. All available extra options will be shown for whichever model you select as you customize your order. Select your model or universal size from the list below, and click on that link to be taken to the order page for that model.

Optional Accessories

Quick Disconnect Fittings

Thru-Wall Exhaust Ports

Optional Quick Disconnect Fittings
Through-Wall Kit

Quick disconnect fittings allow you to quickly remove your hose from your generator, and are available on the 1-1/2” tubing designs. The fittings are open, so your generator can be run with the remaining half of fitting without issue. These fittings are fitted with a high temperature O-ring seal for durability. If a quick disconnect is being considered, it can always be added to any 1-1/2” tubing design at a later date.

Through-wall exhaust ports for 1” and 1-1/2” ID tubing are available to complete your project. These kits are constructed from stainless steel to give you years of trouble free service. The overall length of the assembly is approximately 13” with about 8” of that going through the wall. Inside wall mounting brackets and the proper clamp are included in the kit. Both single and double wall designs are available.

Along with exhaust extensions, top of the line magnetic dipsticks and oil change tubes are offered for some makes and models. During normal operation of a generator, fine metal shavings will develop in the oil thus causing significant engine wear. Our highly magnetic dipsticks are very effective at collecting these metal shavings; thus greatly reducing wear and tear on the engine.

MAGNETIC DIPSTICKS

Generator Magnetic Dipstick

Magnetic dipsticks are interchangeable that will fit the EU1000i, EU2000i, and EU3000is, along with Honda engine models GX100, and GXH50. A different design magnetic dipstick is available that will fit the EU6500is, EU7000is, along with Honda engine models GX240, GX270, GX340, and GX390.

Magnetic dipsticks are available that will fit the Champion 3500/3400/3100/2800 watt inverter generators. A similar design, but specific to the Champion 2000 watt inverter generator is also available.

Magnetic dipsticks are available in two options; anodized and non-anodized. Non-anodized dipsticks are made of aluminum, whereas anodized dipsticks are also aluminum, but go through a coating process that ensures that the aluminum dipstick will never seize to the aluminum block of the engine. This is especially helpful in marine environments and saltwater environments. The anodized dipsticks appear to be maroon in color.

OIL CHANGE TUBES

Generator Oil Change Tube

Our Genexhaust oil change tubes are premium quality and make changing the oil on your Honda EU1000i or EU2000i generator easy, allowing you to tip and drain your unit without causing a messy oil spill. Our oil change tube will fit both a Honda EU1000i and EU2000i model generator.

Oil Change Tubes are also available in two options; anodized and non-anodized. Non-anodized tubes are made of aluminum, whereas anodized tubes are also aluminum, but go through a coating process that ensures that the aluminum tube will never seize to the aluminum block of the engine. This is especially helpful in marine environments and saltwater environments. The anodized oil change tubes appear to be maroon in color.