Genexhaust Weld-On Extension – Hardware Only – Universal – Will fit exhaust port up to 1-1/4″D X 1-1/2″L with small weld bead

Please select from the options at the bottom of this page if you would like to order the Genexhaust hardware without a hose for the model listed above.

The available options are 1.5” hardware (for either steel or silicone hose), 1” NPT hardware, which can be used with 1” NPT threaded steel pipe, or 4” hardware, which is used for dryer exhaust type hoses. 4” aluminum exhaust hoses can be purchased at any hardware store. Scroll through the images to see the available hardware for this model.

You have the option of adding a discounted quick disconnect for each of these options, and a discounted through-wall kit for the 1.5″ hardware. The prices for each item are listed as you make your selections.

For additional Genexhaust Universal weld-on sizes, or model specific designs, please click here.

A Through-Wall Kit mounts in the wall of your building or enclosure and allows you to hook up your extension hose and vent your generator exhaust outside. Kits are available in longer and shorter versions for 1.5” hoses (both for steel or silicone hoses). The longer kit is more suitable for going through thick exterior walls, whereas the shorter kit is more suitable for going through a single layer wall, such as a plastic utility shed.

Both versions of the Through-wall kits are “Double Shield”. This just means that there are two layers of metal with a space in between each layer, and offers the best insulation from the heat of the exhaust.

Please make a selection in EACH dropdown box to ensure order accuracy. Please carefully review your selections before hitting the “Add to Cart” button, as changes cannot be made to your package in the cart.